Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 50 seconds
- Pressure:
- Medium
- Prepress:
- 15
- Substrate:
- JB001 (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
- Lint Roller
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Lint roll the image area of the towel.
3. Place towel face up on bottom table, cover with protective paper, and pre-press for 15 seconds.
4. Secure transfer to the towel using Adhesive Spray.
5. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
6. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: Some towels may have loose material, like lint or other debris, in them that could affect the quality of the transfer. You should vigorously shake each towel in a snapping motion to free this material prior to transfer. A more deliberate additional cleaning technique is to use a sticky lint roller on the imaging side of the towel after shaking.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- PROTECTIVE PAPER
- BOTTOM TABLE