Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 6 minutes
- Pressure:
- Medium
- Substrate:
- CROSS97 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
- Green Pad
- Nomex Felt
Heat Press Method Instructions
1. Place Nomex Felt Pad on Bottom Table.
2. Cover the Nomex Felt Pad with a sheet of protective paper.
3. Use Adhesive Spray to attach your transfer to the ornament.
4. Place the ornament with imaging side face up, on top of Nomex Felt Pad and protective paper, on bottom table.
5. Cover with a sheet of protective paper.
6. Cover it all with a piece of 1/8" Green Rubber Pad and press according to time, temperature, and pressure above.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- GREEN PAD
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- NOMEX FELT PAD
- PROTECTIVE PAPER
- BOTTOM TABLE