Instruction Details
- Temperature:
- 375°F / 190.56°C
- Time:
- Varies - See Below
- Pressure:
- Light
- Substrate:
- TUM217, TUM218, MUG048, MUG049, SSCUP13W, SSCUP13S, SSB16W, SSB16S, MUG050, MUG051, TUM232, TUM233, SSLB18W, SSLB18S, SSD720W, SSD720S, (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
- 1/8" Heat Conductive Green Rubber
- Sublimation Shrink Wrap
Heat Press Method Instructions
Instructions for Using a DK3D Mug Press
1. Secure transfer to the Tumbler using Heat Tape.
2. Cover with protective paper
3. Wrap the tumbler with heat conductive rubber (we recommend HCR-181010 for skinny tumblers)
4. Place Tumbler in Mug Press and close the heating element
5. Press at 375 degrees for 2 minutes
6. Rotate tumbler and press for an additional 2 minutes
Instructions for Using a DK3 Mug Press
1. Secure transfer to the Tumbler using Heat Tape.
2. Cover with protective paper
3. Wrap the tumbler with heat conductive rubber (we recommend HCR-18610 for skinny tumblers)
4. Place Tumbler in Mug Press and close the heating element
5. Press at 375 degrees for 2 minutes
6. Rotate tumbler and press for an additional 2 minutes
Shrink Instructions
Instructions for Using an Oven and Sublimation Shrink Wrap
1. Remove all plastic parts and lids
2. Cut out design and affix to tumbler using gold heat tape
3. Cover entire tumbler with blowout paper
4. Place in Sublimation Shrink Wrap bag
5. Use heat gun to shrink bag to tumbler
6. Place in oven for 6 minutes at 360 degrees
7. Remove from oven
8. Remove shrink bag and image from tumbler
