Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 60 seconds
- Pressure:
- Heavy
- Prepress:
- 15
- Substrate:
- JDW781 (Part numbers may vary by distributor)
Additional Items Needed
- Lint Roller
Heat Press Method Instructions
1. Remove paper portion from notebook and fully open linen jacket.
2. Cover the bottom table of the press with a sheet of protective paper.
3. Sticky lint roll the image area of the substrate.
4. Place substrate, linen face up, on bottom table, cover with protective paper, and pre-press for 15 seconds.
5. Secure transfer to substrate using Adhesive Spray.
6. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
7. Top with protective paper and press according to time, temperature, and pressure above.
**Application notes: firm pressure is required to ensure a good image.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE