Instruction Details
- Temperature:
- 375°F / 190.56°C
- Time:
- 50 seconds
- Pressure:
- Medium
- Prepress:
- 10
- Substrate:
- NLP134, NLP107, NLP109, NLP110, NLP113, NLP114, NLP116, NLP117, NLP120, NLP140, NLP141, NLP142, NLP143, NLP144, NLP145, NLP150, NLP151, NLP152, NLP153, NLP154, NLP155, NLP160, NLP161, NLP162, NLP163, NLP164, NLP165, NLP170, NLP171, NLP172, NLP173, NLP174, NLP175, (Part numbers may vary by distributor)
Heat Press Method Instructions
1.Cover the bottom table of the press with a sheet of protective paper.
2. Place blank product on bottom platen, cover with another sheet of protective paper and prepress for 10 seconds
3.Secure transfer to substrate using Adhesive Spray, do not use tape.
4.Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5.Top with protective paper and press according to time, temperature, and pressure above.
Application note: Should substrate warp or buckle after pressing, weight the substrate while cooling.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE