Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 60 seconds
- Pressure:
- Light to Medium
- Prepress:
- 10
- Substrate:
- PC111, PC112, PC113, PC114, PC115, PC116 (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
- Lint Roller
- Vapor Foam Kit
- Nomex Felt
Heat Press Method Instructions
1. Place an appropriate size piece of Vapor Foam or Nomex into the pet shirt
2. Lint Roll and prepress
3. Secure transfer to the garment using Adhesive Spray
4. Place garment face up, with attached transfer face down, on top of protective paper on bottom table.
5. Place a sheet of protective paper between the layers of the garment to prevent sublimation ink from transferring onto foam or Nomex
6. Top with protective paper and press according to time, temperature, and pressure above