Instruction Details
- Temperature:
- 380°F / 193.33°C
- Time:
- 1 minute 30 seconds
- Pressure:
- Medium
- Substrate:
- PZL53, PZL54 (Part numbers may vary by distributor)
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to puzzle using Adhesive Spray or Heat Tape. It is recommended to keep the puzzle on the cardboard to keep it together.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
4. Top with protective paper and press according to time, temperature, and pressure above.
Application note: Should substrate warp or buckle after pressing, weight the substrate while cooling.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE