Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 4 minutes
- Pressure:
- Medium; PSI for Automatic Presses: 40
- Substrate:
- IC037 (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
- Green Pad
Heat Press Method Instructions
1. Print transfer NOT MIRROR IMAGED.
2. Place nail file coated (white) side up on platen.
3. Using DyeTrans Adhesive Spray affix the image to the imaging side (white side) of the nail file. (Face down)
4. Apply a piece of 1/16” thin green heat conductive rubber on the transfer.
5) Press.