Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 1 minute 45 seconds
- Pressure:
- Medium
- Substrate:
- U60377, U8517-1, U8516-1, U7513-1, U7508-1, U7154-1, U6929-1, U6928-1, U60378, U5610-1, U4838-1, U4833-1, U4832-1, U10124, U7386 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
9X18, 11X14.........................1 Minute 30 Seconds
16x20..............................1 Minute, 45 Seconds
48x48 & up...........................2 Minutes, 30 Seconds
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using adhesive spray or Heat Tape.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
4. Cover it all with a piece of Poly Poplin Fabric.
5. Top with protective paper and press according to time, temperature, and pressure above.
Application note: Should substrate warp or buckle after pressing, weight the substrate while cooling.
Click here for the Unisub Substrate Cutting Tip Sheet
Stack Order for Heat Press
- HEAT PRESS PLATEN
- POLYPOPLIN FABRIC
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE