Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 60 seconds
- Pressure:
- Medium
- Prepress:
- 5 seconds if needed
- Substrate:
- JDW766, JDW765, (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
- Lint Roller
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Sticky lint roll the image area of the substrate.
3. Place a small strip of Teflon or metal in loop area of flag
4. Place substrate face up on bottom table, cover with protective paper, and pre-press for 30 seconds.
5. Secure transfer to substrate using Adhesive Spray.
6. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
7. Top with protective paper and press according to time, temperature, and pressure above.
8. Remove Teflon strip and allow flag to cool
Washing instructions: Linen products are safe with machine washing in water temperatures below 122°F (50°C).
