Instruction Details
- Temperature:
- 375°F / 190.56°C
- Time:
- 60 seconds
- Pressure:
- Light
- Substrate:
- AWB4244, AWB3840, NLP121, NLP122, NLP123, NLP124, NLP135, NLP136, NLP137, NLP139 (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
Heat Press Method Instructions
1. Remove loop from watchband.
2.Secure transfer to substrate using Adhesive Spray.
3.Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
4.Top with protective paper and press according to time, temperature, and pressure above.
5. Insert pins and tongue.
6. Attach all lugs and buckle to straps and pins ensuring that the lug side with the 3 black magnetic components are facing up for Apple watches.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE