Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 3 Minutes
- Pressure:
- Medium
- Substrate:
- BT22A (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
- 1/8" Heat Conductive Green Rubber
- 1/2" Nomex Felt
Heat Press Method Instructions
1. Place Nomex Felt Pad on Bottom Table.
2. Cover the Nomex Felt Pad with a sheet of protective paper.
3. Use Heat Tape to attach your transfer to the tile.
4. Place the tile with imaging side face up, with attached transfer face down, on top of Nomex Felt Pad and protective paper, on bottom table.
5. Cover with a sheet of protective paper.
6. Cover it all with a piece of 1/8" Heat Conductive Green Rubber Pad, and press according to time, temperature, and pressure above.
Application notes: Do not use grout for IronClad tiles, especially colored grout which will stain the tiles. Mortar, glue or silicone are recommended.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- GREEN PAD
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- NOMEX FELT PAD
- PROTECTIVE PAPER
- BOTTOM TABLE