Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 4 Minutes 30 Seconds
- Pressure:
- Medium
- Substrate:
- PB01W-CH, PB01W, PH11 (Part numbers may vary by distributor)
Heat Press Method Instructions
1. Secure transfer to the Ceramic Mug using Heat Tape.
2. Top with protective paper, taking care not to extend the paper well above or below the top and bottom of the mug.
3. Place Ceramic Mug in Mug Press and close the heating element around the mug.
4. Press for 4 min and 30 secs, at 400, and medium pressure.
5. Remove any paper residue with a soft wet cloth or dish sponge.
Click here for an in-depth FAQ on Mug Pressing Techniques
Application notes: The typical imaging area for a mug is 1.25? in from the handle and .25? from the top and bottom sides of the mug.
Place heat tape on the transfer edges closest to the handle that does not have sublimation ink on it after you have aligned the image on the mug. Use heat tape to attach the transfer to the mug taking care not to cover any of the imaging area.
Use a fan to cool ceramic mugs or the A6000 Kool Plate. Do not dunk mugs in water.
Oven Instructions
Instructions for Using an Oven and DYEWRAP
1. Secure transfer to the Ceramic Mug using Heat Tape.
2. Wrap and secure DYEWRAP, over transfer, to the Ceramic Mug. Take care to ensure the transfer is not wrinkled under the wrap.
3. Place in 400° preheated oven for 15 minutes.
4. Remove mug from oven and immediately remove transfer and wrap and allow to cool under a fan.
Shrink Instructions
Instructions for Using an Oven and Sublimation Shrink Wrap
Time: 13 Minutes
Temp: 400°
1. Remove all lids or plastic parts.
2. Secure image to substrate using heat tape.
3. Place Sublimation Shrink Wrap around blank, secure with tape if necessary.
4. Use heat gun to form Sublimation Shrink Wrap evenly around blank product.
5. Place in oven for appropriate time and temperature.