Instruction Details
- Temperature:
- 380°F / 193.33°C
- Time:
- 1 Minute 20
- Pressure:
- Light
- Substrate:
- LS2412W (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using Heat Tape.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
4. Cover it all with a piece of protective paper and press according to time, temperature, and pressure above.
Application notes: When using LaserSub, you only transfer the portion of the image that will not be cut by the laser. This product is compatible with laser engravers only.
Click here for instructions for lasering the LaserSub.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE
