Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 50 Seconds
- Pressure:
- Medium
- Substrate:
- 5002, 5001 (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
- Lint Roller
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to the pillow case using Adhesive Spray.
4. Place pillow case face up, with attached transfer face down, on top of protective paper on bottom table.
5. If needed, place a sheet of protective paper between the layers of the pillow case to prevent sublimation blow-through.
6. Top with protective paper and press according to time, temperature, and pressure above. If your design includes black and very dark colors, add 10 seconds to press time.
Application notes: Press and paper lines can be an issue when pressing fabrics. Click here for a video showing how to feather or "deckle" the edge of the transfer.
If your design includes black and very dark colors, add 10 seconds to press time.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE