Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 2 Minutes
- Pressure:
- Medium
- Substrate:
- U4591, U4590 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Cut a mousepad to the shape of the easel backing.
3. Secure transfer to substrate using Adhesive Spray or Heat Tape.
4. Place substrate face up, with attached transfer face down, on top of mousepad and protective paper on bottom table.
5. Cover it all with a piece of Poly Poplin Fabric (PP7813. and press according to time, temperature, and pressure above.
Application note: Should substrate warp or buckle after pressing, weight the substrate while cooling.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- POLYPOPLIN FABRIC
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE