Instruction Details
- Temperature:
- 375°F / 190.56°C
- Time:
- 50 seconds
- Pressure:
- Light
- Substrate:
- PW94K (Part numbers may vary by distributor)
Heat Press Method Instructions
Do not remove protective film from back of fabric piece.
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using Adhesive Spray.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
4. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: Do not remove protective film from back of fabric piece. Let your customer end user remove it on first use. This will ensure it does not get any debris on it. Do not use heat tape.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE