Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 1 minute 30 seconds
- Pressure:
- Heavy
- Prepress:
- 20 Seconds
- Substrate:
- U4723, U4721 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Place substrate face up on bottom table, cover with protective paper, and pre-press for 20 seconds. Do not skip this step. After cooling, dry any remaining moisture on the substrate.
3. Secure transfer to substrate using Adhesive Spray or Heat Tape.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Cover it all with a piece of Poly Poplin Fabric (PP7813..
6. Top with protective paper and press according to time, temperature, and pressure above.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- POLYPOPLIN FABRIC
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE