Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 60 seconds
- Pressure:
- Medium
- Substrate:
- U7105 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure both transfers to substrate using Adhesive Spray or Heat Tape.
3. Place substrate face down, with attached transfer sandwich, on top of protective paper on bottom table.
4. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: Allow the transferred substrate to sit and cool. Do not handle it hot, to reduce the chances of damaging the coating on the edges.
Curve the panel on a large round surface or use a Precision Roller.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- SUBSTRATE
- TRANSFER
- PROTECTIVE PAPER
- BOTTOM TABLE