Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 1 Minute 45
- Pressure:
- Light
- Substrate:
- PNB8511K, PNB46K (Part numbers may vary by distributor)
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using Adhesive Spray.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Hang PinchBook binding off edge of heat press to protect.
6. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: If book should “bow” out as it cools, simply place it back in the press the opposite side up with protective paper on top and bottom and press it for 10 seconds. Hold it flat to a cool table as it cools and it should be corrected.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE