Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 45 seconds
- Pressure:
- Medium
- Substrate:
- SM041GS, SM041GG, SM040GS, SM040GG (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
The Glitter Aluminum will never be able to reproduce full color photos and graphics. Use solid color or contrasting color line drawings or logos only for best results.
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using Adhesive Spray or Heat Tape.
3. Place substrate face down, with attached transfer face up, on top of protective paper on bottom table.
4. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: For attaching insert to holder, we recommend e6000 (sold separately under part number 230025) or Liquid Nails For Small Projects, Clear Silicon Adhesive. Beware that the set time is 6 hours and the cure time is 16 hours.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- SUBSTRATE
- TRANSFER
- PROTECTIVE PAPER
- BOTTOM TABLE