Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 30
- Pressure:
- Light
- Prepress:
- 5 Seconds
- Substrate:
- FLP030, FLP029, FLP028, FLP027, FLP016, FLP015, FLP014, FLP013 (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
- Lint Roller
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Lint roll the image area of the substrate.
2. Place substrate face up on bottom table, cover with protective paper, and pre-press for 5 seconds.
3. Secure transfer to substrate using Adhesive Spray.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: The Flip Flop Assembly Tool (FLP013. will work easier if you lubricate the tool on the outside of the clip-grip. We recommend any brand of Spray PTFE Dry Non-Staining Lubricant. Read the label and choose a lubricant without silicone.
Sample brands available at your local hardware store include Blaster® or Elmers® E450 Slide-All.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE