Instruction Details
- Temperature:
- 385°F / 196.11°C
- Time:
- 40 seconds
- Pressure:
- Light
- Substrate:
- SUBMET11W, SUBMET11SS (Part numbers may vary by distributor)
Heat Press Method Instructions
When applying images to both sides of substrate, it is recommended you press both sides at once.
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using Adhesive Spray.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table. You may print both sides at once; just insert the item between two printed transfers and press.
4. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: When applying images to both sides of substrate, it is recommended you press both sides at once.
Do not stack items while hot. Place separately on a table to cool.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE