Instruction Details
- Temperature:
- 385°F / 196.11°C
- Time:
- 45 seconds
- Pressure:
- Light
- Substrate:
- CPM005-01, CPM005, CPM004-01, CPM004, CPM003-01, CPM003, CPM002-01, CPM002, CPM001-01, CPM001 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using Adhesive Spray or Heat Tape.
3. Place substrate face down, with attached transfer face up, on top of protective paper on bottom table.
4. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: Some inserts have a slight jagged edge. Rubbing the edge across a flat sheet of paper on a hard surface will smooth the edge.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- SUBSTRATE
- TRANSFER
- PROTECTIVE PAPER
- BOTTOM TABLE