Instruction Details
- Temperature:
- 385°F / 196.11°C
- Time:
- 1 minute 15 seconds
- Pressure:
- Light
- Substrate:
- MB54, MB75 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
- Adhesive Spray
- Lint Roller
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Lint roll the image area of the substrate.
3. Secure transfer to substrate using Adhesive Spray.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table. Place entire closed notebook on heat platen.
5. Top with protective paper and press according to time, temperature, and pressure above.
Application note: Should substrate warp or buckle after pressing, weight the substrate while cooling. For double-sided items: Let cool completely, repeat steps 1-5 for second side.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE