Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 1 minute 15 seconds
- Pressure:
- Medium
- Substrate:
- SN46, SN45 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
- Adhesive Spray
- Lint Roller
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Lint roll the image area of the substrate.
3. Secure transfer to substrate using Adhesive Spray or Heat Tape.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Top with protective paper and press according to time, temperature, and pressure above.
Application note: Should substrate warp or buckle after pressing, weight the substrate while cooling.
Slip covers onto spiral and press inward slightly to lock in place. Paper is not refillable.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE