Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 8 minutes
- Pressure:
- Light
- Substrate:
- SG448, SG362, SG452, SG6811, SG6812, SG1168, SG1268, SGFBC6, SGFBC7, SGFBC8, SGFBC9, SGFBC10, SGFBC11, SG10079. SG10912 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
- Green Pad
Heat Press Method Instructions
1. Do not mirror the image. Tape the transfer onto the frosted side of the plaque. Note: If you are imprinting to a plaque with a chipped glass border, beware this area is sublimatable.
2. Place 1/8" thick Nomex felt onto the Teflon covering the bottom of the press. Place the plaque, imaging side face-up with transfer aligned, onto the yellow felt pad on the bottom of the press.
3. Cover the front of the plaque with a 1/8" thick green silicone rubber pad.
4. Press with Temp/Time/Pressure settings listed above.
5) After pressing, allow the plaque to cool for a few minutes before removing the transfer.
6. Clean any excess ink residue from the glass using standard window cleaner after the glass has completely cooled.