Instruction Details
- Temperature:
- 385°F / 196.11°C
- Time:
- 1 minute 15 seconds
- Pressure:
- Light
- Substrate:
- DS063SS, DS063SG, BDG315-S, BDG315-G, BDG217-S, BDG217-G, DS062W, DS062SG (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using Adhesive Spray or Heat Tape.
3. Place substrate face down, with attached transfer face up, on top of protective paper on bottom table.
4. Top with protective paper and press according to time, temperature, and pressure above.
Do not stack items while hot. Place separately on a table to cool.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- SUBSTRATE
- TRANSFER
- PROTECTIVE PAPER
- BOTTOM TABLE