Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 1 minute 15 seconds
- Pressure:
- Medium
- Substrate:
- U5995, U5917, U4731, U4728, U4670, U4668, U4666, U4664, U4662, U4660, U4600, U4411, U4408, U4107, U4106, U60288, U60289, U4906, U4907 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
- Adhesive Spray
Heat Press Method Instructions
1. Cover the bottom table of the press with a sheet of protective paper.
2. Secure transfer to substrate using Adhesive Spray or Heat Tape.
3. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table. You may print both sides at once; just insert the item between two printed transfers and press.
4. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: Double-sided items: Let cool completely, repeat steps 1-4 for second side.
Do not stack items while hot. Place separately on a table to cool.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE
