Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 60 seconds
- Pressure:
- Light to Medium
- Substrate:
- ACR335, ACR334, ACR341, ACR340, ACR337 (Part numbers may vary by distributor)
Heat Press Method Instructions
Do NOT mirror or reverse image when printing transfer.
1. Cover the bottom table of the press with a sheet of protective paper.
2. Remove any peel coat from substrate
3. Secure transfer to substrate using Adhesive Spray or Heat Tape.
4. Place substrate face up, with attached transfer face down, on top of protective paper on bottom table.
5. Top with protective paper and press according to time, temperature, and pressure above.
Application notes: One side of the acrylic is glossy and the other is matte. The matte side is the side you imprint. The gloss side has a blue peel coat that needs to be removed prior to pressing.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE