U9949 Bunting Tag Sublimation Instructions

Instruction Details

Temperature:
400°F / 204.44°C
Time:
45 seconds
Pressure:
Light
Substrate:
U9949 (Part numbers may vary by distributor)

Additional Items Needed

Heat Press Method Instructions

Medium Pressure PSI: 40

1. Put down protective paper on the heat press platen.

2. Press imaging side face up with protective paper on top of the transfer image. Use Adhesive Spray or heat tape to attach your image to the face-up substrate

3. Allow to cool

OUR INSTRUCTIONS ARE BASED ON USING A DK20S, DK3110 AND/OR A COUNTER TOP CONVECTION OVEN. TIMES AND TEMPERATURES WILL VARY DEPENDING ON WHICH EQUIPMENT YOU USE.

Heat Press Pressure Cheat Sheet

Level
PSI
Press Dial Level
Average Human Resistance Felt
Contact Pressure
10-15 psi
1 on press dial
Where the platen just makes physical contact with product
Light Pressure
20 psi
2 on press dial
Resistant with one arm pressing down, easy with two arms
Medium Pressure
40-60 psi
3-5 on press dial
Resistant with two arms pressing down, doesn't require usage of shoulders
Heavy Pressure
80 psi
6 and up on dial
Very resistant with two arms pressing down, requires lifting of elbows and shoulders to lock in place

Latest Sublimation Articles

Sublimation Tips and Tricks - How-To: Waste Ink Collector Unit
Sublimation Tips and Tricks - How-To: Waste Ink Collector Unit

How to Replace the Waste Ink Collector in Sawgrass SG400, SG500, SG800, and SG1000 Printers Optimizi... keep reading

Sublimation Tips and Tricks - The Black Box Test
Sublimation Tips and Tricks - The Black Box Test

Mastering the Black Box Test: A Step-by-Step Calibration Guide When experimenting with new substrate... keep reading

Ultimate Chromaluxe Pressing Guide: Achieve Flawless Sublimation Prints Every Time
Ultimate Chromaluxe Pressing Guide: Achieve Flawless Sublimation Prints Every Time

Chromaluxe Pressing Instructions Welcome to the ultimate guide on pressing Chromaluxe panels! Whethe... keep reading