Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 5 Minutes*
- Pressure:
- Heavy
- Substrate:
- GCB001 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
- Nomex Felt
Heat Press Method Instructions
1. First place a sheet of protective paper on the bottom table.
2. Place the Nomex felt pad on top next.
3. Place another sheet of protective paper.
4. Affix the transfer to the substrate with either heat tape or Prospray.
5. Place substrate face down, so that transfer rests below the substrate.
6. Press at recommended time, temperature, and pressure.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- PROTECTIVE PAPER
- SUBSTRATE
- TRANSFER
- PROTECTIVE PAPER
- NOMEX FELT PAD
- PROTECTIVE PAPER
- BOTTOM TABLE
