Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 2 minutes 30 seconds
- Pressure:
- Heavy
- Substrate:
- YZ152, YZ111S (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
- Adhesive Spray
- Fabric
Heat Press Method Instructions
Do NOT mirror or reverse image when printing transfer.
1. Cover the bottom table of the press with a sheet of protective paper.
2. Use Adhesive Spray or Heat Tape to attach your transfer to the substrate. Place substrate face up, with attached transfer face down, on top of protective paper, on bottom table.
3. Cover it all with a piece of Poly Poplin Fabric and press according to time, temperature, and pressure above.
Application notes: Do NOT mirror or reverse the image when you print the transfer.
Stack Order for Heat Press
- HEAT PRESS PLATEN
- POLY POPLIN
- TRANSFER
- SUBSTRATE
- PROTECTIVE PAPER
- BOTTOM TABLE