Instruction Details
- Temperature:
- 380°F / 193.33°C
- Time:
- 60-70 seconds
- Pressure:
- Heavy
- Prepress:
- 10-15 seconds
- Substrate:
- CT2814W (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
- Lint Roller
- Vapor Foam Kit
Heat Press Method Instructions
1. Cover the bottom press platen with a protective paper sheet to prevent bleed from image and/or shirt dyes.
2. Place the towel, imaging side face up, on the protective paper and lint roll the entire area that will come into contact by the press.
3. Hang the edges of the towel off the sides of the press if you can; if your image needs to be close to those edges, you may want to add Vapor Foam to push up the area near the hems so they do not make the press fall unevenly.
4. Lint roll and prepress the fabric, let cool.
5) Lightly mist transfer with DyeTrans Adhesive Spray.
6. Place the transfer on the fabric, smooth wrinkles.
7. Cover with protective paper. This paper must cover the entire area of the material that comes into contact with the heat platen.
8. Press with Temp/Time/Pressure settings listed above.