Instruction Details
- Temperature:
- 370°F / 187.78°C
- Time:
- 35 seconds
- Pressure:
- Medium
- Prepress:
- 5-10 seconds
- Substrate:
- 4020XS, 4020S, 4020M, 4020L, 4020X, 4020X2, 4020X3, 4022XS, 4022S, 4022M, 4022L, 4022X, 4022X2, 4022X3, 4023XS, 4023S, 4023M, 4023L, 4023X, 4023X2, 4023X3, 4024XS, 4024S, 4024M , 4024L, 4024X, 4024X2, 4024X3 (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
- Lint Roller
- Vapor Foam Kit
Heat Press Method Instructions
1. Cover the bottom press platen with a protective paper sheet to prevent bleed from image and/or shirt dyes.
2. Place the shirt, imaging side face up, on the protective paper and lint roll the entire area that will come into contact by the press.
3. Place a piece of protective paper between the layers of the fabric (if applicable) to prevent the image bleeding through to the other side. You also can use Vapor foam for this purpose.
4. Prepress the fabric, let cool.
5. Lightly mist transfer with DyeTrans Adhesive Spray.
6. Place the transfer on the fabric, smooth wrinkles.
7. Cover with protective paper. This paper must cover the entire area of the material that comes into contact with the heat platen.
8. Press with Temp/Time/Pressure settings listed above.
Vapor Apparel certifies garments with PURE-Tech, MShield, UPX 50+ and Sublimation Certified designations.
>Click here for explanations of the certifications.