Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 55 - 70 seconds
- Pressure:
- Light
- Substrate:
- U5732, U5782-002, U9697 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
U6600 - 70 seconds
U5732, U5782-002, U9697 - 55 seconds
1. Place protective paper on the bottom of the press.
2. Remove the plastic peel coating from the metal, this is the imaging side.
3. Adhere the transfer to the metal using Adhesive Spray or heat tape.
4. Place the metal, imaging side face-down onto the transfer, on top of the protective paper. Add a sheet of protective paper on top. Press.
5) Remove the transfer from the metal quickly, be sure to take care as the metal will be hot.