Instruction Details
- Temperature:
- 390°F / 198.89°C
- Time:
- 50-70 seconds
- Pressure:
- Light to Medium
- Prepress:
- 20-30 seconds
- Substrate:
- MP013, SW10495, SW15752 (Part numbers may vary by distributor)
Additional Items Needed
- Pro Spray
- Lint Roller
Heat Press Method Instructions
1. On press platen, put down a piece of protective paper.
2. Put your fabric on the press, you may lint roll if needed.
3. Pre-press for 30 seconds. Allow to cool.
4. Print the transfer mirrored. Use Adhesive Spray lightly.
5. Place the side of the material to be printed face up on the bottom platen and then apply the image to be transferred face down onto the substrate.
6. Press, then lift platen slowly so fabric does not shift. The larger the piece of fabric, the longer you will need to press.
