Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 40- 55 seconds
- Pressure:
- Heavy
- Prepress:
- 15 seconds
- Substrate:
- KFC02K, IPC01K, BDR912, BDR79, BDR35 (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
- Nomex Felt
Heat Press Method Instructions
IPC01K -55 seconds press time
BDR912 -55 seconds press time
IPC00K -55 seconds press time
BDR79 -45 seconds press time
KFC02K -45 seconds press time
BDR35 -40 seconds press time
1. Lint Roll the imaging area of the case.
2. Put a sheet of protective paper on top of the Teflon.
3. Lay case on press face up and cover with protective paper. (Important: non-imaged portion of case needs to be protected from the hot platen with a thin (1/8") piece of felt). Pre- press for 15 seconds. Cool.
4. Using Adhesive Spray, affix the transfer to the case.
5) Place it imaging side face-up (transfer down) on the press. (Important: non-imaged portion of case needs to be protected with felt).
6. Cover with protective paper.
7. Press.