Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 45 seconds
- Pressure:
- Light
- Prepress:
- 10 seconds
- Substrate:
- SP53F-PINK (Part numbers may vary by distributor)
Heat Press Method Instructions
1. Prepress sponge, white side face up, protective paper on top.
2. Remove sponge from press and allow cooling.
3. Adhere image onto the white side of the sponge.
4. Place sponge, imaging side face up, onto the bottom rubber platen of the heat press.
5) Press.
6. Advise the end customer to soak sponges in chlorine bleach and thoroughly rinse before use. Some of the ink in the sponge is not colorfast and will run/bleed if not removed.