Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 60 seconds
- Pressure:
- Light
- Substrate:
- MBX11-W (Part numbers may vary by distributor)
Additional Items Needed
- Adhesive Spray
- Teflon Sheet
Heat Press Method Instructions
1. Cover the bottom press platen with a protective sheet of paper to prevent bleed from image.
2. Place the box, imaging side face up, on the protective paper. Cover the adhesive sticker area with a small piece of teflon .
3. Lightly mist transfer with Adhesive Spray and place the transfer image face down on top of the box
4. Cover with protective paper.
5. Press.