Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 45 seconds
- Pressure:
- Light; PSI: 20
- Substrate:
- P03 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
1. Put down protective paper on the heat press platen.
2. Press Imaging Side Face-Down: Lay down the image and use heat tape to secure the substrate in place.
Some items are two-sided; if you want, you can print both sides at once; just insert the item between two transfer images.
You may also print one side, then the other; just allow the substrate to cool fully between pressings.
3. Cover with protective paper. Press using time and temp above.