Instruction Details
- Temperature:
- 400°F / 204.44°C
- Time:
- 80 seconds
- Pressure:
- Medium to Heavy; PSI for Auto Presses: 40-80
- Substrate:
- U5956, U5961 (Part numbers may vary by distributor)
Additional Items Needed
- Heat Tape
Heat Press Method Instructions
1. Place a protective paper on the bottom of the press.
2. Remove the plastic peel coating from the metal – this is the imaging side. (Larger pieces may not have peel coat)
3. Adhere the transfer to the metal using DyeTrans Adhesive Spray or heat tape.
4. Place the substrate, imaging side face-down, transfer placed underneath, onto the protective paper covering the bottom of the press. Press.
6. Remove the transfer from the metal being sure not to touch the imaging area while hot.